Log Cabin Online

The brass collar on this steel shank bullet puller keeps the screw centered on the ball; preventing damage to the barrel and making the pulling of the bullet easier. Threaded 8 x 32, available in 6 sizes from .32 caliber to .58 caliber.

The brass collar on this steel shank bullet puller keeps the screw centered on the ball; preventing damage to the barrel and making the pulling of the bullet easier. Threaded 10 x 32, avaliable in 6 sizes from .32 caliber to .58 caliber.

Made to ream fouling from face of breech plug and breech end of bore. Brass construction with steel shank. Threaded 8 x 32, available in 10 sizes from .32 caliber to .74 caliber.

Made to ream fouling from face of breech plug and breech end of bore. Brass body with steel shank, Threaded 10 x 32, Available in 10 sizes from .32 to .74 caliber.

Brass scraper with end cut to conform to the end of all Thompson Center breech plug powder wells. Improves reliability and consistency of ignition. One size fits all T/C calibers and 12 ga. New Englander. Threaded 10 x 32

Designed especially for muzzle-loading fireams. The solid bases are drilled, then the brass wire stem is inserted thru the base and assembled. This prevents the swab from pulling off the base and becoming lost in the barrel. Available in 10 sizes from .32 to .75 caliber 10 x 32 threads.

Designed especially for muzzle-loading fireams. The solid bases are drilled, then the brass wire stem is inserted thru the base and assembled. This prevents the swab from pulling off the base and becoming lost in the barrel. Available in 10 sizes from .32 to .75 caliber 8 x 32 threads.

This series of bore brushes is designed with muzzle-loading applications in mind. The bronze bristles do a superior job of scrubbing caked black powder fouling from the bore. The bristle-holding main shaft is attached permanently to the base to prevent separation while being extracted from the bore. Threaded 10 x 32, available in 10 sizes .32 caliber - .75 caliber

This series of bore brushes is designed with muzzle-loading applications in mind. The bronze bristles do a superior job of scrubbing caked black powder fouling from the bore. The bristle-holding main shaft is attached permanently to the base to prevent separation while being extracted from the bore. Threaded 8 x 32, available in 10 sizes from .32 caliber to .75 caiber.

The handy way to clean those hard to reach places in the breech of any muzzle loading firearm. A 1/4" steel shank holds stiff phosphorous/bronze bristles to scrub the caked fouling from the breech plug. Threaded 10 x 32

The handy way to clean those hard to reach places in the breech of any muzzle loading firearm. A 1/4" steel shank holds stiff phosphorous/bronze bristles to scrub the caked fouling from the breech plug. Threaded 8 x 32

Steel screw, brass shank and heavy duty steel cork screw combine to make this a superior patch puller. Threaded 10 x 32.

Steel screw, brass shank and heavy duty steel cork screw combine to make this a superior patch puller. Threaded 8 x 32. Similar to the above puller but heavier construction.

For all Thompson Center guns and others, .32 to .54 cal. Threaded 10 x 32.

for .58 cal. Muskets. Attaches to Zouave, EOA Enfield and other metal rods.

This adapter screws on the male threads of steel musket ramrods providing a female 10-32 thread for all the various ramrod accessories that are available. The adapter is 2-1/2" long providing a little extra length to the ramrod.

This adapter screws on the male threads of steel musket ramrods providing a female 10-32 thread for all the various ramrod accessories that are available. The adapter is 2-1/2" long providing a little extra length to the ramrod.

Patterned after originals found in historical digs, this simple worm fits over the plain end of a wooden rod and holds a swab of tow to clean a smoothbore or large caliber rifle. So simple, but it really works. Locks tight to rod, yet easily removed. Rifle size will work in .45 cal. & larger bores