!
!

LARGE SILER FLINT LOCK, LEFT HAND
43SL5
!
43sl5
Top quality, early style (late 1700’s) flint lock. Plate is 5-1/4" long, 15/16" wide. Left hand.

Finished lock assembled from Siler kit by Jim Chambers with all investment cast parts properly hardened and ready for use. Fly in tumbler.

JAEGER FLINT LOCK, RIGHT HAND from Davis
43DL2
!
43dl2
A large, early style flint lock suitable for Jaeger rifle. Top quality, clean investment cast parts. Fly in tumbler. Rugged and dependable. Throws a heavy shower of sparks. Plate is 6" long, 1" wide. Right hand.

1803 HARPERS FERRY FLINT LOCK, RIGHT HAND from Davis
43DL3
!
43dl3
Copy of an original. Plate marked “Harpers Ferry 1803” behind the hammer. Eagle and U.S. in front of hammer. Uses Siler internal parts.

Match with Harpers Ferry hardware shown elsewhere in this catalog to make an excellent, authentic flint rifle for hunting or target. Right hand.

EARLY TWIGG FLINT LOCK RIGHT HAND from Davis
43300
!
43300
A smooth, fast-action flint lock made with nicely finished investment cast parts all properly hardened and ready for use. Features v-springs, bridle and fly w/ roller frizzen. “Waterproof” pan. Plate is 5-5/8" long, 1" wide. Right hand.

BECKY FLINT LOCK, RIGHT HAND from Davis
43043
!
43043
A fine, small lock suitable for very small rifles and pistols. Germanic styling. Plate 4-3/16" long x 13/16" wide. Features tumbler w/ fly and v-springs. Right hand.

COLONIAL AMERICAN FLINTLOCK
43122
!
Davis Colonial American Flintlock

by Davis. An early Germanic "export lock" of the mid 1700's era. This lock is fast and throws a good shower of sparks. Top quality, clean, investment cast parts. Plate is 5-13/16" long, 1" wide. Right hand only. 

(RPL) SMALL FLINT LOCK RIGHT HAND from L & R
43017
!
43017

Replaces the Spanish Maslin, Russ Hamm, CVA, Traditions, etc. Plate measures 4-9/16" x 7/8". Equipped with v-springs, bridled tumbler and roller frizzen. "Waterproof" pan. Right hand.

This line of locks from L & R will replace locks found in many popular "commercial" guns on the market today. These locks are not "drop-ins". They do require some inletting to allow for the working parts. Patterns for wood removal will be provided in a booklet of instructions packaged with the lock. Depending  on skill level , they can be installed in 15 to 35 minutes  using common chisles and gouges.

(RPL) LARGE FLINT LOCK RIGHT HAND from L & R
43018
!
43018
Replaces CVA Hawken, Traditions, etc. Plate measures 5" x 1". Equipped with v-springs, bridled tumbler and roller frizzen. "Waterproof" pan. Right hand.

This line of locks from L & R will replace locks found in many popular "commercial" guns on the market today. These locks are not "drop-ins". They do require some inletting to allow for the working parts. Patterns for wood removal will be provided in a booklet of instructions packaged with the lock. Depending  on skill level , they can be installed in 15 to 35 minutes  using common chisles and gouges.

(RPL)THOMPSON CENTER FLINT LOCK RIGHT HAND from L & R
43019
!
43019
Replaces Thompson Center "Hawken", "Renegade" and others, Lyman, Hawes, etc. Plate measures 5" x 1". Equipped with V-springs, bridled tumbler with stirrup and roller frizzen.

This line of locks from L & R will replace locks found in many popular "commercial" guns on the market today. These locks are not "drop-ins". They do require some inletting to allow for the working parts. Patterns for wood removal will be provided in a booklet of instructions packaged with the lock. Depending  on skill level , they can be installed in 15 to 35 minutes  using common chisles and gouges.

(RPL) DIXIE FLINT LOCK RIGHT HAND from L & R
43022
!
43022
This fine lock has all the features of the other RPLs, but was designed specifically to fit the Dixie Tennessee Mountain mortise. 

 A new lock bolt is also included with fitting instructions. Also is a fine choice for custom work. Recommended flint size is 5/8"

THOMPSON CENTER HAWKEN FLINT LOCK RIGHT HAND from THOMPSON CENTER
43713
!
43713
As used on the Thompson Center flint version of the Hawken, Renegade, and other sidelock rifles. Coil spring inside, excellent sparker. Fly in tumbler. Color case hardened. Plate is 5" long, 1" wide. Interchanges with percussion, Right hand.

FRIZZEN COVER, LEATHER {SMALL}
80200
!
80200
This simple leather boot slipped over the frizzen will prevent ignition by keeping the flint from striking the face of the frizzen. Fits all locks up to Brown Bess and other

DAVIS, SILER SPEED KIT
89251
!
89251
Designed to improve “lock timing” on the large right hand Siler flint lock.

This kit includes: FRIZZEN with tipped-forward toe geometry for fast action with the over center cam on the frizzen spring. Frizzen is slotted for use with the anti-friction roller included. FRIZZEN SPRING with fancy leaf finial and improved cam ramp for the roller frizzen. Frizzen spring is tempered, roller needs to be installed. Frizzen is annealed and ready to be fitted to the lock plate. Frizzen needs to be hardened.

MAINSPRING VISE
20MSV1
!
MAINSPRING VISE
Copy of an original. The best way to take mainsprings out of locks; prevents breaking springs.