Knife Components & Kits
!

BRUSLETTO KNIFE BLADES

746**
!
BRUSLETTO KNIFE BLADE
by Brusletto. Tough, high quality steel blades made in Norway. Pre-sharpened, require only final honing. Unconditionally guaranteed against breakage for five (5) years. If it breaks, you get a new blade free. A unique 3-layer, laminated construction has ahard inner layer sandwiched between mild layers to provide a keen, durable cutting edge without being brittle. Available in two sizes "Camper" with 3-1/2" blade or Patch Cutter with 2-3/4" blade

NORWEGIAN-STYLES SOLINGEN BLADES

746***
!
Solingen Carbon Steel Blades- These  high carbon steel blades are highly polished and hand sharpened. Fine quality.  Easy to finish into an authentic, durable knife. Available in four practical sizes: Patch Cutter blade 2-3/4", Possum Blade 3-1/4", Camper Blade 3-3/4", Kodiak blade 4-1/2".

FROST KNIFE BLADES

74***
!
Frost knife blades from Mora, Sweden. The highest quality swedish cutlery steel, polished and pre-sharpened make these economical blades a great choice for campers, hunters and re-enactors. High carbon steel, hardened to about 59 rockwell. Tough and durable blades take and hold an edge very well. Available in three sizes: Woodsman Blade 3", Woodland Blade 4", Wilderness Blade 6".

BUFFALO SKINNER KNIFE BLADE

74BUF050
!
RUSSELL KNIFE BLANK
American made recreations of original American designs. Made of the finest steel to take and hold a very keen edge. Marked “Russell Green River Works - Made in U.S.A.” on the blade.

"Buffalo Skinner" - Used by professional hide hunters of the Old West. 9"overall, 1/8" thick. Perhaps the best skinner ever developed.

CAMP KNIFE BLADE

74CAM050
!
RUSSELL KNIFE BLANK
American made recreations of original American designs. Made of the finest steel to take and hold a very keen edge. Marked “Russell Green River Works - Made in U.S.A.” on the blade.

"Camp Blade" - Blade is 5" x 15/16"; just under 1/8" thick. 9-1/8" overall.

RUSSEL GREEN RIVER KNIFE BLADE

74RGR050
!
RUSSELL KNIFE BLANK
American made recreations of original American designs. Made of the finest steel to take and hold a very keen edge. Marked “Russell Green River Works - Made in U.S.A.” on the blade. "Russell Green River" - A pattern made famous by Russell.

5" blade, 1" wide, 3/32" thick, 9" overall.

RIPPER KNIFE BLADE

74RP040
!
RUSSELL KNIFE BLANK
American made recreations of original American designs. Made of the finest steel to take and hold a very keen edge. Marked “Russell Green River Works - Made in U.S.A.” on the blade.

"Ripper Blade" - 4" x 7/8" x 1-1/16". Overall length is 8-3/8". Tapers from hilt to point. American version of Scots Skean Dhu.

SHEATH KNIFE BLADE

74SHE045
!
RUSSELL KNIFE BLANK
American made recreations of original American designs. Made of the finest steel to take and hold a very keen edge. Marked “Russell Green River Works - Made in U.S.A.” on the blade.

"Sheath Blade" - 4-1/2" blade, 1-3/16" wide just behind point, tapers to 7/8" at hilt; just over 1/16" thick. Overall length 8-1/2".

ANTLER HANDLED PATCH KNIFE KIT

745002
!

This kit makes one of the best knives we have ever used. Kit includes a fine quality Norwegian Patch cuter blade, 2-3/4" long, a center section antler handle and two brass pins. New and improved, fully illustrated instruction booklet also included.

DADLEY KNIFE KIT

745008
!
This knife kit features a genuine Russell Green River 5" blade. Kit contains a set of premium curly maple scales, cutler rivets and an illustrated instruction booklet on knife making. This kit is one of the easiest types of knife to make and require little time and few tools.  

A great scouting project!

BUFFALO SKINNER KNIFE KIT

745004
!
This knife kit features a genuine Russell Green River Buffalo Skinner 5" blade. Kit contains a set of premium curly maple scales, set of 3 cutler rivets and an illustrated instruction booklet on knife making. This kit is one of the easiest types of knife to make and require little time and few tools.  

Makes a great scouting project too!

CURLY MAPLE KNIFE HANDLE SLABS

74CMS
!
MAPLE KNIFE SLABS
Curly maple slabs, 1-3/4" x 5" x 1/2". One set (2 pieces).

WALNUT KNIFE HANDLE SLABS

74WS1
!
WALNUT KNIFE SLABS
Straight grain walnut slabs, 1-3/4" x 5" x 1/2". One set (2 pieces).

CUTLER RIVETS

74CR*
!
CUTLER RIVETS

Set of three solid brass rivets drive together to permanently mount the handle to knife blade. A set consists of three (3) male and three (3) female pieces. Available in two sizes MEDIUM -1/2" long, for use on handles 5/8" to 7/8" thick. Head diameter 5/16".                                              

LARGE - 3/4" long. Head diameter 5/16".

BRASS NAILS, 3/8 x #15

74BNA
!
Used to hold inlays in guns, to decorate tomahawk handles, mount powder horn base plugs, etc. One (1) ounce packets. 3/8" long x #15 diameter, (.072")

BRASS ROD

742**
!
Brass rod for pinning knife handles, barrels, etc. Available 1/16", 3/32" or 1/8" round x 12" long

STEEL ROD

742**
!
Steel rod for pinning knife handles, barrels, etc. Available in 1/16" or 3/32" diameter x 12" long.

GERMAN SILVER ROD

74217
!
German silver rod, 3/32" round x 12" long

BRASS BAR STOCK

74021
!
Solid brass bar stock 3/8" x 3/4" x 3" long.

BRASS SINGLE END KNIFE GUARD

74KP17
!
BRASS KNIFE GUARD
Cast brass single end knife guard, 1-3/4" overall, 3/16" thick.