!
!

(RPL) LOCK, PERCUSSION, DIXIE, R.H. from L & R
42023
!
42023

This lock has all the features of the other RPL locks, but was designed specifically to fit the Dixie Tennessee Mountain Mortise.

This line of locks from L & R will replace locks found in many popular "commercial" guns on the market today. These locks are not "drop-ins". They do require some inletting to allow for the working parts. Patterns for wood removal will be provided in a booklet of instructions packaged with the lock. Depending  on skill level , they can be installed in 15 to 35 minutes  using common chisles and gouges.

BECKY PERCUSSION LOCK, RIGHT HAND from Davis
42044
!
42044
A fine, small lock suitable for very small rifles and pistols. Germanic styling. Plate 4-3/16" long x 13/16" wide. Features tumbler w/ fly and v-springs. Right hand.

GOLCHER PERCUSSION LOCK, RIGHT HAND from Davis
42400
!
42400
A copy of a very popular, original lock found on a great many antique Ohio rifles. Features v-mainspring with stirrup link to tumbler, bridle and fly. 4-3/4" long, 1" wide.

OHIO PERCUSSION LOCK, RIGHT HAND from Davis
42DL1
!
42dl1
An ideal lock for an Ohio or Plains rifle. Uses Siler internal parts. Plate cut for drum. 5-1/4" long, 15/16" wide. Smooth and dependable. Has fly and round end plate. Right hand.

HAWKEN (LONG) PERCUSSION LOCK, RIGHT HAND from Davis
42LL1
!
42ll1
High quality Long lock, properly hardened and well finished. Fly in tumbler. Authentic and dependable. Plate 4-7/8" long, 1" wide, 1-1/2" throw. Right hand.

High quality locks with polished inside finish, properly hardened and ready for use.

HAWKEN (LONG) PERCUSSION LOCK, LEFT HAND
42LL2
!
42ll2
High quality Long lock, properly hardened and well finished. Fly in tumbler. Authentic and dependable. Plate 4-7/8" long, 1" wide, 1-1/2" throw. Left hand.

High quality locks with polished inside finish, properly hardened and ready for use.

HAWKEN (LONG) PERCUSSION LOCK, LEFT HAND from Davis
42268
!
42268c
High quality Long lock, properly hardened and well finished. Fly in tumbler. Authentic and dependable. Plate 4-7/8" long, 1" wide, 1-1/2" throw. Left hand.

High quality locks with polished inside finish, properly hardened and ready for use.

LARGE SILER PERCUSSION LOCK, RIGHT HAND
42SL3
!
42sl3
Top quality, Percussion Lock. Plate is 5-1/4" long, 15/16" wide. Right hand.

Finished lock assembled from Siler kit by Jim Chambers with all investment cast parts properly hardened and ready for use. Fly in tumbler.

LARGE SILER PERCUSSION LOCK, LEFT HAND
42SL7
!
42sl7
Top quality, Percussion Lock. Plate is 5-1/4" long, 15/16" wide. Left hand.

Finished lock assembled from Siler kit by Jim Chambers with all investment cast parts properly hardened and ready for use. Fly in tumbler.

SMALL SILER PERCUSSION LOCK, RIGHT HAND
42SL4
!
42sl4
Plate is 4-3/4" x 13/16" wide. Right hand only.

Finished lock assembled from Siler kit by Jim Chambers with all investment cast parts properly hardened and ready for use. Fly in tumbler.

LATE STYLE SILER PERCUSSION LOCK, RIGHT HAND
42SL6
!
42sl6
Takes large Siler internal parts. Plate is 4-5/8" long, 15/16" wide. Round tail. Plate cut for drum. Top quality, dependable. Right Hand.

Finished lock assembled from Siler kit by Jim Chambers with all investment cast parts properly hardened and ready for use. Fly in tumbler.

LATE STYLE SILER PERCUSSION LOCK, LEFT HAND
42SL8
!
42sl8
Takes large Siler internal parts. Plate is 4-5/8" long, 15/16" wide. Round tail. Plate cut for drum. Top quality, dependable. Left hand

Finished lock assembled from Siler kit by Jim Chambers with all investment cast parts properly hardened and ready for use. Fly in tumbler.

UNDERHAMMER ACTION KIT PERCUSSION
42UHAK
!
csc_0160_000
This kit produces a simple, dependable, fast-action lock for a light bench gun. Will work with 1" barrels; however, works best with 1-1/8" to 1-1/2" barrels. Total length approximately 6".

Investment cast steel parts come with holes spotted but not drilled or tapped. Pins and screws not included. Trigger & hammer must be hardened at engagement points. Mainspring must be tempered. Designed to fit a pistol grip stock. Replacement mainspring is available. Complete with instructions on tempering of mainspring.

MAINSPRING VISE
20MSV1
!
MAINSPRING VISE
Copy of an original. The best way to take mainsprings out of locks; prevents breaking springs.