!
!

.50 CAL. GREEN MOUNTAIN LONG RANGE HUNTER DROP-IN BARREL1" x 28" PERCUSSION

40M50188
!
40m3218
.50 caliber "Drop-In" barrel, 1" x 28" long. 1-28" fast twist. Percussion. Excellent for heavier conical and saboted bullets.

These "Drop-In" barrels are a fast easy upgrade for Thompson Center "Hawken", "Renegade", and many other popular factory made muzzleloading rifles. Further customize your rifle by picking a slow twist rifiling for exceptional accuracy with a round ball; or a fast twist Long Range Hunter barrel for outstanding results with many conical bullets, including sabots. These barrels come complete with rib, thimbles, underlug, adjustable sights, ramrod and nipple. Blued finish.

.40 CAL. GREEN MOUNTAIN "TARGET" DROP-IN BARREL, 15/16" x 38" PERCUSSION

40M40538
!
40m3218
.40 caliber "Drop-In" barrel 15/16" x 38" long, 1-48" twist. Percussion. The longer barrel length makes this the ultimate target barrel.

These "Drop-In" barrels are a fast easy upgrade for Thompson Center "Hawken", "Renegade", and many other popular factory made muzzleloading rifles. Further customize your rifle by picking a slow twist rifiling for exceptional accuracy with a round ball; or a fast twist Long Range Hunter barrel for outstanding results with many conical bullets, including sabots. These barrels come complete with rib, thimbles, underlug, adjustable sights, ramrod and nipple. Blued finish.

.50 CALIBER GREEN MOUNTAIN PISTOL BARREL

40M507P
!
40m3213p
Pistol barrel blank, .50 caliber, 7/8" x 12" long. Threaded for 5/8-18 breech plug.

Machined to the same high standards as their rifle barrels, these Green Mountain pistol barrels are an excellent choice for custom builders. Rifled 1 turn in 22 inches for best accuracy with a patched round ball.

BREECH PLUG WRENCH

205***
!

For Thompson Center and Lyman barrels. Available once again, a breech plug wrench made for the traditional style, side lock rifles. This 3/8" thick steel block makes plug removal much easier, with no danger of marring barrel finish. Available in 13/16" for Thompson Center Cherokee or Seneca. 15/16" for .45 & .50 caliber Thompson Center Hawken and .50 and .54 caliber Lyman Great Plains rifle. 1" for .54 caliber Thompson Center Hawken and Renegade rifles. 

.

FLAT BARREL RIB

40BR***
!
40br17
Available 13/16" & 7/8"; 15/16", 1-1/8"

Machined steel ribs attach to the bottom flat of the barrel of a Hawken, Plains, Ohio or other half stock style rifle. Extending from the forend cap to the muzzle, they are attached to the barrel with solder or machine screws. The upper ramrod pipes attach to the rib which acts as a spacer, keeping the rod far enough away from the barrel to allow placement of barrel tenons. 24 inches long.

DOVETAIL CUTTING GUIDE

682417
!
This hardened "File Jig" will enable the user to cut perfect dovetails time after time. Perfect for installing sights and underlugs on rifle barrels. In addition to the jig, you will need a 1/4" triangular file, a triangular jewler's or swiss file, and a common edge cutting file.