!
!

HAWKEN HALF STOCK, FULL-INLET GRADE 1 MAPLE, 1"
462311
Weight: oz
!
462311
Traditional full-inlet Hawken Half Stock. 1" barrel channel 7/8" ramrod groove. Grade 1, right hand only.

 SUGGESTED PARTS: L & R lock #42015 & hook breech #41200. Butt plate not inlet (use #48H14S); Hawken trigger by L & R (#53ST29S); nose cap by Cash (#52NC2S);toe plate (#492003). Use steel inlays (#5653S) and lock bolt inlay (#56LB1). Stock is 32" overall w/ 15" barrel channel. Features a beavertail cheek piece.

HAWKEN HALF STOCK, FULL-INLET, GRADE 2 MAPLE, 1"
462321
Weight: oz
!
462311
Traditional full-inlet Hawken Half Stock. 1" barrel channel 7/8" ramrod groove. Grade 2, right hand only.

 SUGGESTED PARTS: L & R lock #42015 & hook breech #41200. Butt plate not inlet (use #48H14S); Hawken trigger by L & R (#53ST29S); nose cap by Cash (#52NC2S);toe plate (#492003). Use steel inlays (#5653S) and lock bolt inlay (#56LB1). Stock is 32" overall w/ 15" barrel channel. Features a beavertail cheek piece.

HAWKEN HALF STOCK, FULL-INLET, GRADE 3 MAPLE, 1"
462331
Weight: oz
!
462311
Traditional full-inlet Hawken Half Stock. 1" barrel channel 7/8" ramrod groove. Grade 3, right hand only.

 SUGGESTED PARTS: L & R lock #42015 & hook breech #41200. Butt plate not inlet (use #48H14S); Hawken trigger by L & R (#53ST29S); nose cap by Cash (#52NC2S);toe plate (#492003). Use steel inlays (#5653S) and lock bolt inlay (#56LB1). Stock is 32" overall w/ 15" barrel channel. Features a beavertail cheek piece.

HAWKEN HALF STOCK, FULL-INLET, GRADE 4 MAPLE, 1"
462341
Weight: oz
!
462311
Traditional full-inlet Hawken Half Stock. 1" barrel channel 7/8" ramrod groove. Grade 4, right hand only.

 SUGGESTED PARTS: L & R lock #42015 & hook breech #41200. Butt plate not inlet (use #48H14S); Hawken trigger by L & R (#53ST29S); nose cap by Cash (#52NC2S);toe plate (#492003). Use steel inlays (#5653S) and lock bolt inlay (#56LB1). Stock is 32" overall w/ 15" barrel channel. Features a beavertail cheek piece.

THOMPSON CENTER HAWKEN STOCK, GRADE 4 MAPLE.
4626415
Weight: oz
!
4626415
MAPLE T/C HAWKEN STOCK - Customize your T/C Hawken rifle. This fully inlet, maple stock will accept all the hardware from a standard T/C Hawken (the lock mortice, trigger/trigger guard, tang and barrel escutcheon area).

Barrel channel  15/16" w/ 3/8" ramrod groove. Patch box area not inlet. Overall length 31" with a 14-1/2" barrel channel. Available in Maple only, grade 4 only.

ENGLISH RIFLE HALF STOCK, WALNUT, 1"464091
464091
Weight: oz
!
464091
Overall length 28-1/2" with a 12" barrel channel, inlet to accept a 1" o.d. octagon barrel. Walnut only.

pre-shaped English half-stock blank is inlet to accept the L & R Shotgun lock #42011. With the proper English hardware described elsewhere, you will have a fine English rifle of the mid to late 1800’s period. Inlet to accept breech plug and trigger  bar. 

ALLENTOWN FULL STOCK, GRADE 1, 13/16"
4622113
Weight: oz
!
4622113
Allentown or "Kentucky" rifle stock in grade 1 maple, 13/16" barrel channel. Right hand.

Based on an original rifle made by Andrew Vernor of Bucks Co., Pennsylvania (probably Revolutionary War era). The butt is rather flat, the stock somewhat thick with a wrist wider than high. The comb is straight and the underside of the butt stock is slightly curved. Overall length 59", maximum pull 15"; drop 3-3/4", barrel channel is 42" long, 3/8" ramrod groove. Lock mortice is 6-1/2" wide by 1-1/4" high. RIght hand only.

ALLENTOWN STOCK, GRADE 2 MAPLE, 13/16"
4622213
Weight: oz
!
4622113
Allentown or "Kentucky" rifle stock in grade 2 maple, 13/16" barrel channel. Right hand.

Based on an original rifle made by Andrew Vernor of Bucks Co., Pennsylvania (probably Revolutionary War era). The butt is rather flat, the stock somewhat thick with a wrist wider than high. The comb is straight and the underside of the butt stock is slightly curved. Overall length 59", maximum pull 15"; drop 3-3/4", barrel channel is 42" long, 3/8" ramrod groove. Lock mortice is 6-1/2" wide by 1-1/4" high. RIght hand only.

ALLENTOWN STOCK, GRADE 3 MAPLE, 13/16", R.H.
4622313
Weight: oz
!
4622113
Allentown or "Kentucky" rifle stock in grade 3 maple, 13/16" barrel channel. Right hand.

Based on an original rifle made by Andrew Vernor of Bucks Co., Pennsylvania (probably Revolutionary War era). The butt is rather flat, the stock somewhat thick with a wrist wider than high. The comb is straight and the underside of the butt stock is slightly curved. Overall length 59", maximum pull 15"; drop 3-3/4", barrel channel is 42" long, 3/8" ramrod groove. Lock mortice is 6-1/2" wide by 1-1/4" high. RIght hand only.

ALLENTOWN STOCK, GRADE 4 MAPLE, 13/16"
4622413
Weight: oz
!
4622113
Allentown or "Kentucky" rifle stock in grade 4 maple, 13/16" barrel channel. Right hand.

Based on an original rifle made by Andrew Vernor of Bucks Co., Pennsylvania (probably Revolutionary War era). The butt is rather flat, the stock somewhat thick with a wrist wider than high. The comb is straight and the underside of the butt stock is slightly curved. Overall length 59", maximum pull 15"; drop 3-3/4", barrel channel is 42" long, 3/8" ramrod groove. Lock mortice is 6-1/2" wide by 1-1/4" high. RIght hand only.

TENNESSEE MOUNTAIN STOCK, FULL-INLET, for Siler Grade 1, 13/16"
4624113
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and small Siler lock, 3/8" ramrod channel. Grade 1, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTAIN STOCK, FULL-INLET, for Siler GRADE 2, 13/16"
4624213
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and small Siler lock, 3/8" ramrod channel. Grade 2, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023.

TENNESSEE MOUNTAIN STOCK, FULL-INLET for SILER, GRADE 3, 13/16"
4624313
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and small Siler lock, 3/8" ramrod channel. Grade 3 Maple, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTAIN STOCK, FULL-INLET for SILER, GRADE 4, 13/16"
4624413
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and small Siler lock, 3/8" ramrod channel. Grade 4 Maple, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTIAN STOCK FULL-INLET for MANTON, GRADE 1 MAPLE, 13/16"
4628113
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and Manton lock, 3/8" ramrod channel. Grade 1 maple, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTAIN STOCK, FULL-INLET for MANTON, GRADE 2 MAPLE 13/16"
4628213
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and Manton lock, 3/8" ramrod channel. Grade 2, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTAIN STOCK, FULL-INLET for MANTON, GRADE 3 MAPLE 13/16"
4628313
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and Manton lock, 3/8" ramrod channel. Grade 3, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTAIN STOCK, FULL-INLET for MANTON GRADE 4, 13/16"
4628413
Weight: oz
!
4624113

Full stock inlet with 13/16" barrel channel and Manton lock, 3/8" ramrod channel. Grade 4, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTAIN STOCK, FULL-INLET for MANTON, GRADE 1, 7/8"
462817
Weight: oz
!
4624113

Full stock inlet for 7/8" barrel and Manton lock, 3/8" ramrod channel. Grade 1 maple, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023

TENNESSEE MOUNTAIN STOCK, FULL-INLET for MANTON, GRADE 2 MAPLE 7/8"
462827
Weight: oz
!
4624113

Full stock inlet for 7/8" barrel and Manton lock, 3/8" ramrod channel. Grade 2 maple, RIGHT HAND

This stock is 59-1/2" in overall length with 42" barrel channel, maximum pull 15-1/2", drop 3-1/2", butt is 4-1/4" x 1-1/2". The following are a few suggested parts for an authentic Tennessee Mountain Rifle.  Butt plate not inlet (use #48124S or #48H14S); trigger guard (#47218S) and set triggers(#53ST13). Use breech plug #41P38-39. Thimbles not inlet (use #54TT3-4). Nose cap #52EC9A and side plate #492013. Toe plate #492023